Two models available: CFM 6 and CFM 12
Reversible extractors have a higher throughput than the same sized radial extractors. Frames are placed in baskets which swing from one side to the other depending on the direction of spin. Because frames are nearly tangential the extraction is very efficient. Thick honey or even partially crystallised honey is extracted without much effort at all. Also frames never collapse, as sometimes happens in the radials.
CFM 6 extracts 6 full-depth or 12 shallow frames up to 14 cm in height. Baskets 30 x 46 cm with holes for frames. Motor drive: 370 Watt, triple ball bearing, underneath the tank.
CFM 12 extracts 12 full-depth frames per spin, baskets 25 x 46 cm with holes for frames. Motor drive 750 Watt, triple ball bearing, underneath the tank.
Both models have fully automatic speed control. Select from three programmes, vary max and min speed, number of changes in direction, and time. Once set, simply unload and load frames and close lid. Baskets and tank in stainless steel. Acrylic lids on hinges.
Online quotes do not include freight for these items. Please contact Bindaree.
Any online quote will not include freight for this item. Please contact Bindaree Bee Supplies.
Reversible extractors have higher throughputs than radials of the same capacity; because frames are nearly tangential in each direction you don't need to spin them as long. The electronic speed control can be set to start out slow and change direction after a short time; speed is then gradually increased to maximum in each direction. This extractor will not damage your frames; even newly drawn out frames are not damaged. Thick or partially crystallized honey is easily extracted. Typical cycle time may be about 10-12 minutes for thick honey, or 5 minutes for average honey, and the frames are virtually dry. These machines are manufactured in Germany. Carl Fritz extractors and honey processing equipment are top of the range and probably the best available in the world today.
